
We are searching data for your request:
Upon completion, a link will appear to access the found materials.
5 'by magnet
Equipment
Magazines 1 box of washers (40 x 16 mm) 1 pencil Scissors 1 sheet of flexible magnet (to be cut) Contact glue
Production
2 '- Image selection
Spot small images in magazines: take a washer, drag it over the pages until you find an image that perfectly matches its central hole. With a pencil, trace the outline of the washer, then cut it by removing about 2 millimeters all around.
1 '- Cutting the magnet sheet
Cut a 2.8 x 2.8 cm square from the flexible magnet sheet.
2 '- Assembly of the different elements
With contact adhesive, glue the back of the washer as well as the part of the image that will not be visible. Wait for the glue to dry, then put these two elements in contact. Then glue the back of the image and the magnet. After drying, assemble.
You can create magnets of all sizes because the choice of washers is very large. However, choose those with a large central hole so that you can drag an image into them. For small washers, you can use solid colors in the center.
Advice
If the weight of the washer is too great, consider increasing the surface of the magnet. In order not to go wrong with the side of the magnet to be glued, do a very simple test: put it on the washer. Then glue the face of the magnet which is not attracted by the washer against the latter. 20 Metal and wire objects © éditions Flammarion, 2004
Excuse me for what I have to intervene ... similar situation. Forum invitation.
Personal messages to everyone today go out?
I find that you are not right. Write in PM.
By and large, I agree with you. It just seems to some that they definitely need something to stand out from the crowd. And how to stand out is no longer important.
I mean you are not right. I can defend my position. Write to me in PM, we will handle it.
there are some rules.